KAM T25 Snaps

Grouped product items
Product Name Qty
100 Medium Caps - Size T25 - B3 WHITE
100 Large Caps - Size T25 - B3 WHITE
DK93 - T25 Stud Die
DK93 - T25 Socket Die
DK93 - T25 Small Cap Die
DK93 - T25 Medium Cap Die
DK93 - T25 Large Cap Die
DK98 - T25 Stud Die
DK98 - T25 Socket Die
DK98 - T25 Small Cap Die
DK98 - T25 Medium Cap Die
DK98 - T25 Large Cap Die
In stock
KAM T25 Snaps

Snaps are a professional fastening system; they replace the need for hook & loop closures on nappies. They also come in handy for a zillion other things around the home, from clothing to duvet covers to handtowels to sleeping bags...

These T25 snaps are ideal for applications where a wider diameter cap is desired, for example as a snap closure on the waistband of trousers, instead of a button; or where a stronger grip than the size 20 snaps provide is required.

These are NOT Standard, size 20, snaps.  Size 20 snaps measure approximately 12.4mm across, these range from 15mm - 26mm across.

They are a specialty snap, very few people will use.

If you are unsure please CONTACT US to discuss before purchasing.  If you are new to snaps, then it is most likely not the item you are after.

Sockets, studs and small caps measure 15mm in diameter
Medium caps measure 20mm in diameter
Large caps measure 26mm in diameter

Available in B3 - WHITE ONLY

You would generally choose a large or medium cap to be the visible part of the snap on the outside of the garment, then studs and sockets as per other snap sets, then a small cap to make the remainder of the set. But how you choose to match the caps is entirely up to you.
For this reason we sell all the individual parts to these sets on their own in sets of 100 pieces, you you can mix and match the parts to suit your needs.

SNAP PRESS & DIE SETS are required to attach these professional grade Polycetal Resin Snaps.
We also stock the individual dies for these snaps.

You will need a stud die, a socket die, and a cap die for each size cap you will be using, for whichever press you have.

We have all these dies to suit the DK93 and the DK98.

CAP - the cap is the most visible part of a snap, which is the dome that is visible on the outside of the garment. You need one cap per socket or stud. Some people sometimes mix cap colours with the socket or stud they are applying for required visual effects.
SOCKET - is the female part of the snap that joins together with the male – you need one cap to apply one socket to a garment. 
STUD - is the male part of the snap that joins together with the socket – you need one cap to apply one stud to a garment.

Write Your Own Review
You're reviewing:KAM T25 Snaps