5mm Zelor Double Cap Rivets
Starting at $5.00
Zelor Double Cap Rivets
The highest quality rivet money can buy - and here under the Zelor brand.
5mm diameter cap, 7mm stem length
ZELOR RIVETS
Are you looking for an option where the cap of both rivets doesn't deform visually when applied - even in a manufactures supplied die set? Well look no further - these apply perfectly and look as they do in the packet prior to application. Also so far in the testing we have done - the length of the standard stems doesn't matter - so using a standard length stem on a very thin garment will apply the same as if the stem was shorter.
REQUIREMENTS
This listing contains everything you need to get started applying Zelor rivets: A DK93 press, an awl, a die set in the chosen rivet size, and the packs of full sets of rivets in the chosen size.
DETAILS
These Zelor rivets are available in 5mm, 6mm, 7mm, 8mm 9mm, and 10mm options. Measurement is the diameter of the cap.
LONG (10mm) stems and MAX (12mm) stems are available in 8mm, 9mm and 10mm rivet options, in silver only
You MUST have the right size die set for the rivets you are applying - e.g. 5mm requires the 5mm die set. One die set DOES NOT apply all sizes, nor should you use a "one size bigger" die set.
The Zelor rivets have a blunt point on them, and will not in any circumstance self pierce through the layers of fabric you wish to apply them. This listing includes an awl to punch the required hole.
Spcial consideration should be made regarding "rainbow" colour - the shading and pattern on these is random and will differ from piece to piece. Photos are a guide only as to the nature of the colour option.
