KAM Clear Snaps

Clear Snaps require an Open Throat (OT) die set to apply - all our KAM die sets are now Open Throat (OT) technology.  If, however, you have an older size 20 die set, you will be needing to purchase the newer one included in this listing.

If you are still unsure, please get in touch and we can tell you what die set you have

You cannot mix clear snaps with coloured snaps in a garment as they are a slightly different size finished.

B200 Clear Snaps also have a 1/4 life, so last only 3-4 years and break down with UV which relates to the materials used to make them to achieve a clear snap - where as coloured snaps will last for 12 plus years without issue. Combine with the OT die set requirement, 1/4 life, and they are twice the price - most need to think twice about buying/using them.


Snaps are a professional fastening system; they replace the need for hook & loop closures on nappies. They also come in handy for a zillion other things around the home, from clothing to duvet covers to handtowels to sleeping bags...

SNAP PRESS & DIE SETS are required to attach these professional grade Polycetal Resin Snaps.

Size 20 Snaps are the most commonly used size, perfect for nappies. Also great for lots of other uses. If in doubt, use a size 20. Size 20 Caps measure 12.4mm in diameter. 

FULL SNAP SETS - Our 100 full sets contain 100 sockets, 100 studs, and 200 caps (400 total pieces). A full set is enough to apply 100 complete sets of snaps. 
SOCKET & CAP SETS - Our 100 socket & cap sets contain 100 sockets, 100 caps (200 total pieces), enough to apply 100 socket (female) snaps only.


***PART DEFINITIONS***
CAP - the cap is the most visible part of a snap, which is the dome that is visible on the outside of the garment. You need one cap per socket or stud. Some people sometimes mix cap colours with the socket or stud they are applying for required visual effects.
SOCKET - is the female part of the snap that joins together with the male – you need one cap to apply one socket to a garment. 
STUD - is the male part of the snap that joins together with the socket – you need one cap to apply one stud to a garment. 
3-1 RATIO - most people use 3 sockets to 1 stud when making MCN’s, giving a 3-1 ratio. Socket & Cap sets are available because you usually use more sockets than studs on your nappies. To buy a 3-1 ratio, you need to buy 1 full set, and 2 socket & cap sets. Most people start out buying full sets, and topping up their socket and caps later on, but if you are trying to get everything in one hit to save on postage, and are using for nappies, a 3-1 ratio is a good guide.

(OT) = Open Throat Die Set - Open Throat die sets are a more professional die set that are easier to put snaps in when using, and can be used the same as a standard die set. The main difference is you need an OT die set to apply clear snaps, you cannot apply clear snaps properly with a standard die set. If you plan to use clear snaps, you should consider buying an OT die set for your press machine rather than a standard die set at the start.